Take the 2-minute tour ×
Graphic Design Stack Exchange is a question and answer site for Graphic Design professionals, students, and enthusiasts. It's 100% free, no registration required.

I am placing some Photoshop-made artwork into InDesign and exporting to PDF for print. My artwork is quite dark, and Ps's eyedropper tells me that some of my blacks are around the 90/95/95/85 mark. My printer specifies a max of 300% ink. Will the colour profile I use in InDesign (Web Coated FROGRA28) automatically convert these to 300% max equivalents? If not, what do I need to do to prevent the print from becoming way too wet?

share|improve this question
    
The workaround I found is, in Photoshop, to create an alternate version of the image, reduce it to a desirable ink percentage profile and paste that back over the original, using the inverted black channel as a layer mask. As per forums.adobe.com/message/3124365. But that doesn't answer my question. –  Bakabaka Aug 21 '12 at 16:03

2 Answers 2

up vote 2 down vote accepted

Did your printer request FROGRA28? If so I suspect it is fine. If not then as best I can tell it does not reduce the ink low enough if their limit is 300. Some printers are higher, for example the one we use is 321 and FROGRA28 appears to meet that criteria.

How did I come to this conclusion? Easy really, I opened up a new CMYK document in photoshop made a gradient from 0,0,0,0 to 100,100,100,100. Then converted the profile to FROGRA28 and eye dropped the 100,100,100,100 area to find that it was now adding up to about 310.

As far as tricks to fix it, that forum post probably works and might even work better than this method but all I do is convert the image in photoshop to Lab profile and then convert it back to CMYK and it drops all of the colors to under 300.


I suspect another thing you could do to check is take your ID file and finalize just one of the questionable pages to a press ready PDF file based on your Printers specifications, open the PDF in Photoshop and eye-drop it to see where the darkest blacks are at after all of the processing is completely done. I think its going to be about 308 though just like I got doing it straight in photoshop.

share|improve this answer
    
Thanks, those sounds like way easier methods to reduce percentage. My printer requested 300% max, FORGRA is just my personal preference. –  Bakabaka Aug 24 '12 at 9:09

You can also use various tools to report the coverage of a print-ready file:

http://www.printcalc.com

http://www.inkcoverage.net/starting.php

http://avpsoft.com/de/products/apfill/index.html

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.