Take the 2-minute tour ×
Graphic Design Stack Exchange is a question and answer site for Graphic Design professionals, students, and enthusiasts. It's 100% free, no registration required.

Artist Tauba Auberbach produced this recently:

enter image description here

It's called RGB Colourspace Atlas, and is a physical, printed book of what it implies is the whole RGB colour space.

Is there an existing commercially available ink set that could print something like this? Naturally, CMYK printers couldn't do it because they don't cover the full RGB gamut - they couldn't reach the pure reds, greens and blues. And for spot colours, mixing and blending them is a Bad Idea - not what they're normally designed for - so it's hard to see how they could be used in the complex hue gradients.

Could a hexachrome (CMYKOG, Cyan/Magenta/Yellow/Black/Orange/Green) ink set manage this? Or CMYKRB (.../Red/Blue)? Or anything else?

(Bonus points if anyone somehow knows how this exact book was printed, and hat tip to blog Flowing Data)


Edit: just saw these after DA01 and Brenden's answers, which suggests that Hexachrome gets close to the sRGB gamut but doesn't reach all the blues and doesn't quite reach all the greens:

enter image description here Source

...and this which suggests HP Indichrome 6-colour doesn't reach all the reds and blues, and quite a lot on the greens (so you'd expect Indichrome Plus to get close to, but not quite reach, the RGB greens):

enter image description here Source

share|improve this question

3 Answers 3

up vote 2 down vote accepted

The site doesn't say which RGB gamut, so the question has a bit of a hole in it.

HP doesn't give any specs and makes no claims that I know of (I just checked again on a couple of their spec sheets) in relation to reproducing an sRGB or Adobe RGB gamut. They do, justifiably, guarantee accurate reproduction of most of the Pantone colors even without using their offline ink mixer. They do offer Photo Cyan and Photo Magenta, essential for photographic reproduction (which speaks to the RGB color space, of course).

I'll be visiting one of the best digital printing plants in the world a couple of weeks from now and will check. All their digital work is on Indigo, and HP uses them to showcase what the presses can do, to potential buyers. If anybody knows, they will.

The only printer I know of that claims to reproduce the Adobe 1998 RGB gamut in full is the Canon Pro9000 (not the 9500, which uses pigment inks). That requires the right ICC profile and the right paper. I've not tested that claim scientifically, but I can say that it has the best color gamut of any photo inkjet I've used and is a dead-on accurate proofer for CMYK print or grande format work. The Pro9000 uses C, M, Y, K, Photo Cyan, Photo Magenta, Red and Green inks.

share|improve this answer
1  
what's a replacement ink cartridge cost for that? $250? ;) –  DA01 Sep 10 '12 at 0:00
1  
The individual cartridges are about $13 to $16, depending on where you shop. They last well and run out only one or two at a time, typically, so I find if I have a full set on hand I never get caught short. Eight cartridges makes for an impressive print head, I must say. :-) –  Alan Gilbertson Sep 14 '12 at 5:42

If you go to the artist's site, you see in the notes that it was a digital offset print. I don't know which printer this artist used and I don't know a ton about printing but one of the names in that space is HP with their Indigo line of printers. If you look at the spec sheet for the 5600, you see this:

  • Standard 4-color printing: Cyan, magenta, yellow, and black
  • HP IndiChrome 6-color on-press printing: Cyan, magenta, yellow, black, orange, and violet
  • HP IndiChrome Plus 7-color on-press printing: Cyan, magenta, yellow, black, orange, violet, and green

With IndiChrome you can apparently make custom inks to use as well, as you would with normal offset printers. They do Pantone matching and whatnot, so theoretically the sky's the limit.

I'm not a shill for HP or anything; it's just that the printer we work with has Indigo presses so it was a familiar name to look into things. My point I guess is that this was digital offset and if I were to hazard a guess I'd bet the creator of this didn't go with custom inks, which means that a 6 or 7 color process could probably make this work. If so then CMYKOV or CMYKOVG might get it done!

share|improve this answer

The physical differences between reflected and project light means that nothing can really replicate the RGB space on paper.

That said, hexachrome printing can produce a larger color space than CMYK, and adding additional spot colors can increase it even further. Adding luminescent, fluorescent and reflective inks could help as well.

share|improve this answer
    
I think this is the most accurate answer. I do not think even in controlled lighting, one can do any more than approximate the extremes of the colour cube. White paper isn't perfectly white, black ink isn't perfectly black. –  e100 Sep 10 '12 at 11:42

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.