4
votes
2answers
1k views

What is this shifted red and blue effect often seen in VR called? How can I achieve it?

I'm looking for more information regarding a specific type of visual effect that I have been trying to recreate many times in Photoshop, without any success. I would like to learn how to do this from ...
3
votes
1answer
33 views

Retain original colour in a defined brush preset (alternatively, add colour to a grayscale image based on tone)

In Photoshop (or any other program), is there a way to define a brush from an image and retain the colour of the image in the brush, without it being converted to grayscale (and then becoming monotone ...
0
votes
1answer
28 views

Photoshop CS6 will not allow me to choose Shape colour

I've just begun using Photoshop CS6 and encountered a problem I've never had before. 1. Went to Custom Shapes Tool, chose a shape, selected a colour (now shows in foreground). 2. Top bar shows from ...
1
vote
0answers
17 views

Matching a Digital Image's Color to a Scan

I am attempting to clean up some very high resolution scans of pictures, however, while the scans do not have terrible colors, they are off from the originals. I have very low resolution digital ...
1
vote
1answer
49 views

InDesign is changing the color of my image when I export!

thank you for reading my question, this is driving me insane. I have been exporting JPEG in InDesign, my settings are good (I think) but when I export it and open it, the color is darker!!! What am I ...
0
votes
0answers
97 views

Get RGB/Web color values for Avery vinyl colors

I'm doing some basic web-design work pro-bono for a local charity, and I'm trying to match some colors that they use on the side of their vehicles. They use Avery vinyl in two colors and a 3m ...
1
vote
1answer
50 views

matching color tones and lights of 2 images with photoshop

I'll use cartoon or cartoon-like images in my site. In my some articles I'll have more than 1 images that is related to the content. After finding the suitable images I want these images to match by ...
0
votes
1answer
31 views

a simple question relate to colors on screen

I was wondering if the Pantone color on my photoshop does reflect the true pantone color when it print. I am currently working on rendering a packaging image that has pantone color. Other graphic ...
0
votes
1answer
56 views

Approximate image with pixels from reference photo?

In order to color grade my image in same sense of a reference photo, I'd like to approximate my image with the pixel colors from the photo, but on different places. Is this possible?
0
votes
1answer
53 views

Photoshop Hue Change Color

I am doing tilemapping for a game. I originally went with a bright, vivid style but now want to tone it down into a more realistic style. I spent a lot of time making a nice grass tile, but as you ...
0
votes
0answers
76 views

How to match scanner output using ICC profiles in Photoshop?

I'm working with people over the internet to scan and document collectible cards. We each have different scanners, so a challenge we're facing is accurately syncing the colors between them. We have ...
0
votes
3answers
110 views

How do I change the colour of a shape in Photoshop after I've drawn it

For some reason it seems impossible to change the colour of a rectangle I've drawn in Photoshop after I've drawn it. I can change the colour of a new one that I want to draw but once it's drawn there ...
2
votes
2answers
123 views

Photoshop CS 6 - Multiple shapes, same layer, different colors

Does anyone how I can change the color of a single shape, that is in the same layer of another shape, in Photoshop CS 6? The default behavior of changing colors seems to change the color of all shapes ...
12
votes
4answers
2k views

How to turn the grey background white in a phone camera picture of a book?

Here is a picture (of many) that I took from a book with my phone camera. The problem is that the background is too grey. I want it fully white. I have adobe Photoshop CS6. Does anyone know how I can ...
0
votes
1answer
73 views

How can I make Photoshop not change colors on export?

I have a color #840608 somewhere on my web page and it is coded as #840608 by HTML and it displays as #840608 by all browsers plus it is recognized as #840608 by screen analyzing utilities. Now in ...
1
vote
3answers
275 views

How to downsample an image to match a 16-bit color mode?

NOTE: I'm a systems administrator, not a graphic designer, so I'm a total n00b when it comes to image manipulation. That being said, I thought this would be the best forum to ask this question: I am ...
0
votes
1answer
38 views

How do I create and check if a PDF is in X/1-a format?

I've created PDF files with Photoshop, then combined them to create a 16 page PDF. Photoshop's colour profile is set to SWOP (Newsprint), with Total Ink Limit set to 235%. The file will be printed ...
0
votes
0answers
74 views

Can't color pick from external backgrounds in Photoshop CS5

Experiencing some weird behaviour in Photoshop CS5 on a Mac (Mavericks). I've tried resetting all tools, restarting Photoshop and made sure the image is RGB mode (8-bit) but the color picker won't ...
1
vote
1answer
566 views

How to change color of multiple text objects at once?

How to change color of multiple text or vector objects at once in Adobe Photoshop?
0
votes
0answers
45 views

Washed out colors when .psd file has big dimensions

I have a really big .psd (e.g. 2835 x 22677) and it's been exporting washed out images for some reason. I tried saving on different formats(png,jpg,etc...) but it didn't make any difference. On ...
0
votes
1answer
45 views

Question about spot colours in full colour documents

I am trying to understand various aspects of spot colours. If I am working in photoshop and I use say a pantone colour for a part of my artwork (in my CYMK file) ... lets suppose I've used it as the ...
-2
votes
3answers
386 views

How to convert a RGB poster to CMYK with Pantone Colours as reference? (Result must be EXACTLY like RGB)

My file is in RGB, but I need to print it with CMYK. I have tried several printers but they just use my RGB files and print directly, and the result is so bad and dull. My previous printer managed ...
0
votes
1answer
33 views

photoshop - managing color themes and switching between them

As I build out a user interface in photoshop, how can I assign colors to elements (mainly vector shapes but also text, etc) in a way that I can then create themes and then toggle through them? In ...
2
votes
2answers
210 views

Match web color to fabric swatch

I am in the process of creating a wedding website for somebody and I am trying to match some of the accent colors to a fabric swatch that will be used for the bridesmaids dresses. I'm having a heck of ...
5
votes
2answers
139 views

How can I adjust or replace many colours in an image with a new swatch of colours, without causing ugly edges?

I'm having difficulty replacing the colors in an existing image with colors from a new swatch of colors. I've tried the following : Magic wand and fill Color replacement tool Image -> Adjustments -> ...
6
votes
1answer
986 views

How do I reduce the luminance of this sky without it looking weird?

This is a picture I took yesterday: The sky is a bit too washed out for me so I'd like to crank down the luminance of the blue. Camera Raw makes a valiant effort but the crane trusses and other ...
3
votes
1answer
170 views

How to logically organize color palettes for use in Illustrator and Photoshop for a specific project?

I am doing a knowledge transfer at my work to give the incoming designer all of my design assets and direction in an easily digestible format. How would I organize my color palettes in a logical ...
4
votes
7answers
5k views

How do I recreate this color overlay layer effect in Photoshop?

I would like to use the overlay effect used on the screenshot(s) below. I've tried experimenting with several Blending modes but keep missing the mark. I'm sure this has a very easy answer but I'm ...
0
votes
2answers
329 views

Why do my photoshop designs turn neon when I upload them online?

I am confused with what colour profiles I should be using where, as when I upload any of my designs online or try emailing them over to clients sometimes they are fine... but most times they show up ...
0
votes
0answers
63 views

Trouble getting a color in Photoshop to show correctly in my browser [duplicate]

My website has a background color of #EEEEEE (238,238,238). I have an image with a light grey background I want to blend with this background. In Photoshop I used brightness adjustment to get ...
0
votes
1answer
106 views

Interpreting color function and adjusting pixels values

Here is the definition which I read from the net source 1st is Midtone: Situated between the darkest tone (Black), and the brightest tone (White). For a 24 bit colour image, this occurs when ...
1
vote
2answers
105 views

How can I get rid of these 3 PMS channels, without flattening it and losing the transparency

How can I get rid of these 3 PMS channels, without flattening it and losing the transparency? Thanks All!
1
vote
1answer
161 views

How to maintain a grayscale image (1 channel) output in a cmyk layered file that contains a color layer?

Thanks in advance for your help! I have been asked to fix a customer supplied ad targeted for CMYK newsprint. It is a .psd doc. The printer has asked that the file be supplied with the background ...
10
votes
2answers
259 views

How reliable are the colour blindness previews in Illustrator and Photoshop?

Adobe Photoshop and Illustrator have options to preview what artwork will look like to people with red/green colour blindness (protanopia and duteranopia). How reliable are these previews? For ...
0
votes
5answers
227 views

How to tone an image to with a specific color? Like greyscale, but toned

I need this image in a grayscale rgb(82, 82, 74), hex: #52524A: How can I do this on Fireworks or Photoshop?
0
votes
2answers
200 views

How to convert transparent layer to solid? (All variants)

I have a transparent layer, like this one (please notice transparency at the center of the image): How would you fill the layer with a color like it was done here: It is important to fill these ...
0
votes
2answers
94 views

How do I change the color of a certain part of my image?

So basically, I want to edit my image (which was designed by a close friend of mine) to change my glasses from white color, to black instead. I've tried editing the hue/saturation but failed to ...
2
votes
2answers
534 views

How can I replace a color in an image?

I want to replace the blue part of the image with red. I've tried this using a combination of the Magic Wand tool and the Paint Bucket but that doesn't work well. Can somebody please help me out?
0
votes
2answers
349 views

Export Photoshop swatch sheet to a human-readable document

I need to export a Photoshop swatch file to a human-readable document with RGB, HSB, HEX values and the name of the swatch. Is there any tool which can export swatches to this kind of a document?
1
vote
1answer
121 views

Is it possible to reproduce this “comics” effect in Photoshop? [duplicate]

Iā€™m looking for a way to reproduce a similar effect in Photoshop. Is there a filter that can produce this?
1
vote
1answer
267 views

Photoshop: Change pattern color gives me a washed out effect

I'm trying to change the pattern color from a very light gray to a dark blue. I've used the color blending mode, but the result is a washed out color. Is there anything I can do to have a dark color ...
0
votes
1answer
139 views

Why does my compressed JPG have different colors from the original file?

I have no idea at all, first of all, of image internal composition and color modes. That said, I have a very strange problem. These are the pictures: Well, the ORIGINAL is more colorful in ...
0
votes
3answers
133 views

Photoshop - change colors of image

I am very new at photoshop and I am not sure if I have chosen the correct title for the question but I'll give you an example so hopefully that will do it. So basically I am trying to blend one image ...
7
votes
2answers
4k views

How can I change the color of this object properly?

I'm pretty new to Photoshop. I would like to change the color of this object on my .png image: But anyway I try, it becomes this fuzzy with the new color: How can I change it's color to stay in ...
2
votes
1answer
88 views

Color Settings Problem in Photoshop

A few weeks ago, I was trying to figure out how to convert RGB files to CMYK mode. I was viewing hundreds of tutorials and I can remember that most of them taught me to change the color mode from the ...
0
votes
1answer
560 views

Fix colors after or before rgb to cmyk conversion

When I convert from RGB to CMYK in Photoshop as you know colors change saturation and maybe some hue. So basically what the title asks, does it matter when I adjust the colors and saturation via ...
2
votes
2answers
4k views

Colors in Photoshop CS6/CC look different than in browser?

One of my friends, a graphic designer told me recently that sometimes colors in Photshop look slightly different than the ones rendered in browser. I know it is possible when you save a file and then ...
1
vote
2answers
1k views

When I try to add a gradient to my text it will only do so in black and white!

I have created a colour gradient I wish to use, but when I go to Blending Options > Gradient Overlay it applies the gradient but only in black and white (suddenly my colours are only ...
2
votes
2answers
2k views

How can you convert a black and white image into color using Photoshop?

Is there a better way in Photoshop to convert a black & white image into color other than just selecting the area and fill with color?
1
vote
0answers
23 views

Applying color to multiple objects in Photoshop CC [duplicate]

I have multiple objects that I would like to all have the same color. That way, when I change the color of the 'master' object, all the rest would also change. I am sure this is straightforward, but ...