3
votes
1answer
53 views

Is there any way to set fallback font-families in Illustrator SVG?

I'm trying to set up an action that creates versatile text-containing SVG files which can be used in various places including Wikimedia Commons. The only problem is, Wikimedia Commons only supports a ...
0
votes
1answer
122 views

Converting SVG to EMF without loss of data

I have downloaded several SVG files and need to convert them to EMF format ( Enhanced Meta File ). I have used Inkscape's Save as to save it as .emf but loss of data occurred ( I was warned by ...
1
vote
1answer
38 views

Inkscape unable to add the same stroke width to all paths

Hi i just modified a text into paths and curved some paths, i attach an svg of my work. Now i just would like to add stroke to the object so that i can make bold the text, but as you can see , trying ...
6
votes
2answers
650 views

how to rasterize an SVG without anti-aliasing

I've made a map in inkscape and now need to change it to a bitmap or .png. The map will be interpreted by a computer program which will look for exact colors so the edges need to be crisp. when I ...
4
votes
1answer
830 views

How can I create a tiling hexagon tesselation (for SVG/Web)?

I'm looking to create an SVG background image for a webpage using regular hexagons in a tessellation pattern similar to the image below. However, I need the hexagons to interconnect so I can use the: ...
3
votes
1answer
77 views

How can I create paths with accurate border-radii

So I'm getting a little confused with radii in Inkscape. For quite a while I thought that this: was the same as this: ... But it turns out that overlaying them on top of one another reveals that ...
1
vote
2answers
256 views

Cropping SVG files

How do I crop SVG files I created used MarvinSketch? Now I realise there are a few answers to this question like this one Getting rid of Whitespace in Inkscape but I've done that and it didn't work as ...
0
votes
1answer
53 views

How to clone objects in Inkscape so that ctrl-D will show the original object?

I am editing a game board for a word game, based on a "CC BY SA"-licensed SVG file by Denelson83: When I click at a colored square and then press ctrl+D I can see the original colored square - as ...
0
votes
1answer
467 views

Export HUGE png/tiff/pdf from SVG

I need to get an image (optimal would be pdf/tiff but png will work, too) from my svg file. The svg is relatively small (cca 300 kB). What I need is an image in resolution cca 10000x5000px in 60+ ...
0
votes
0answers
157 views

Saving a shape with a pattern to SVG

I have a complex shape (world map) that is filled with a pattern. The pattern is derived from a single symbol. This symbol was created from another SVG file that may have been created with Inkscape. ...
0
votes
0answers
78 views

inkscape problems exporting filling pattern to pdf

I have created a filling pattern. When I export to pdf a shape filled with such pattern I get something really different from what I see in the editor. This is an example: what I see: what I get: ...
0
votes
0answers
188 views

problem with pdf export in inkscape - line stroke

I had today some surprising experience in converting svg to pdf using inkscape. I am preparing drawings for laser cutter. for laser cutting, the drawing should be passed as pdf and the line stroke ...
1
vote
1answer
63 views

Changing text from 2-lines to 1-line - how to center the text field in a square again?

I am developing a word game for iOS and would like to use an SVG file as the gaming board. The SVG file (author: Denelson83, Wikimedia Commons) is almost perfect for my game - except that I would ...
1
vote
4answers
2k views

Using inkscape to convert scanned color drawings to svg — recommended or no?

I'm an ebook publisher trying to include 10 color illustrations inside an ebook. It's not a fixed layout ebook but a reflowable ebook (i.e., an epub). Graphic example here: ...
2
votes
1answer
273 views

Copy, paste, move colored squares - but keep them aligned to the grid

I am developing a word game for iOS and would like to use an SVG file as the gaming board. The SVG file (author: Denelson83, Wikimedia Commons) is almost perfect for my game - except for displaced ...
1
vote
1answer
148 views

Inkscape: Exporting a checkerboard makes lines fuzzy

I made a pretty simple checkerboard in inkscape. It is just many boxes that have an outline that is 1 px thick. They overlap by 1 pixels so all lines are one pixel thick and not two. I did this on a ...
5
votes
2answers
495 views

Is it possible to convert PostScript to SVG? (Inkscape)

Is it possible to convert a PostScript file to SVG? Based on an answer in Tex.SE, I tried to use inkscape: inkscape test.ps --export-inkscape-svg=test.svg This indeed produced an SVG file, but ...
0
votes
1answer
310 views

Problem converting svg to eps in inkscape

I'm using Inkscape to convert an svg to eps. But when I save the svg as eps and open the eps using Gsview, the image is not placed at the center of the page, and even some parts of it are out of view. ...
1
vote
1answer
207 views

Inkscape: reusable components / objects?

We used Adobe Flash for SCADA visualization in the past, but we want to move towards SVG for new web-based SCADA projects. SCADA often uses the same, interactive symbols (like pumps, valves, ...) ...
0
votes
1answer
134 views

Is it possible to give a mask to an SVG document or a layer?

I wish to round the corners of some SVG documents in a such a way that it hides whatever gets in that corner. Like a clipping Mask of any other objects. Is this possible in SVG, or in Inkscape?
2
votes
3answers
2k views

“Select by color” and “draw path from selection” in Inkscape?

I imported an image to Inkscape. Now I'd like to select all those regions that have the same (or to a certain degree similar) color. From this selection I'd like to draw a path (to which I can add a ...
1
vote
1answer
87 views

Transform my icon SVGs to 32px x 32px icons in Inkscape

I'm a newbie to designing things in Inkscape. I'm developing a website, in which the tabbed content will have icons. Some of the icons I designed, I see, aren't uniformly 32px x 32px, when I set the ...
4
votes
1answer
557 views

How to fit svg drawings to their canvas on the command line?

Cropping .svg files on the command line is simple: $ inkscape --verb=FitCanvasToDrawing --verb=FileSave --verb=FileClose *.svg I need to do the opposite. I want to fit the drawing into a 64 x 64 ...
1
vote
1answer
427 views

Inkscape failing at converting an .svg to an .eps (or any other file)

I used inkscape to grab an image out of a pdf. After doing so, I found out the only way it would actually save was to save it to .svg. I then tried saving the svg to eps/pdf/wmf/emf... etc basically ...
2
votes
1answer
341 views

How does Inkscape decide whether to use flowRoot or text?

The program for which I'm creating svg doesn't display text that I create in Inkscape where Inkscape saves the text as flowRoot. When does Inkscape choose to use svg:flowRoot? Is there a way to tell ...
3
votes
1answer
1k views

Using the shape of an object to cut the object beneath it in Inkscape

I'm editing an svg in Inkscape and I have an object on top of another object. I'd like to use the shape of the top object to cut the object beneath it. For those who are familiar with GIMP, I'm ...
2
votes
0answers
291 views

Inkscape: Export SVG to LaTeX-PDF preserving text positioning

I am using Inkscape to export .svg files to LaTeX-PDF using the following command: inkscape --without-gui --file="<file>.svg" --export-pdf="<file>.pdf" --export-latex It generates a pdf ...
8
votes
2answers
6k views

Exporting an object as svg from inkscape

I know that Inkscape does not have the ability to export selected objects as svg, but is there a workaround that people have found that works?
5
votes
1answer
453 views

Is there a way to view the metadata of SVG or EMF files using open source tools?

I have an image/chart that takes a long time to print - actually, a long time to create the post script file. Years ago I had a tool that allowed me to 'inspect/view' the chart and it visually showed ...
4
votes
2answers
407 views

Can I make each group in this SVG file its own SVG file?

I have a huge SVG file that I filled with all the characters for a font. There are a lottt of characters and it'd take forever to manually copy each of them into its own file. Each character has all ...
2
votes
2answers
197 views

Add imperfections to vector graphics / drawings

I'm looking for creative ways to add imperfections or flaws to my vector graphics in order to make them appear more like hand drawn sketches. I'm working with Inkscape so tips that work here are very ...
1
vote
2answers
319 views

SVG to bitmap converter that doesn't generate horrible bitmaps

I've been using Inkscape to generate PNG's from various SVG files. This works fine for larger images, but for smaller images (like icons), bitmaps appear grainy and extremely anti-aliased at the ...
0
votes
2answers
1k views

Single path overlapping? I shoelace design

I'm trying to make something similar to this in Inkscape: I tried making a path then using object to path. But that didn't work. So then I tried using the pen tool from clipboard... Still didn't ...
6
votes
3answers
1k views

How to keep only the visible parts of the every object/path of a SVG image? Like “flatten” all the SVG

I've an SVG image with many objects, ones over anothers. What I need is a final SVG, with the same visual result, but in a way that I could change the opacity of any object without revealing the ...
3
votes
1answer
1k views

how do I import a vector path from Inkscape into Gimp?

I'd like to take an SVG clipart, pull out particular paths from it, and bring them into Gimp and use them to create selections and/or to stroke. Nothing I've tried seems to work -- even though Gimp ...
1
vote
2answers
4k views

Opening Inkscape SVG in Illustrator, not looking right

I'm new to graphics, and had to make a small poster for a competition. I created it in Inkscape, but found out they need a .ai file. I tried opening the SVG in Illustrator, and it just does not look ...
2
votes
2answers
433 views

How can I outline (LaTeX) text in Inkscape?

This is a difficult question to google, as the term "outline" does not mean the same in Inkscape as it does in, e.g., Powerpoint. However, Powerpoint does not support Latex. How can I outline a ...
2
votes
2answers
2k views

How to create a 3D effect in Inkscape as required by the Android Design Guidelines?

In the Iconography section if the Android Design Guide they describe the following style that should be used for Launcher Icons: Use a distinct silhouette. Three-dimensional, front view, ...
2
votes
1answer
793 views

How to batch-export SVG's to EPS on Windows or import them into InDesign CS6

I noticed that in Adobe CS6 there is still no way to import *.svg files into Adobe InDesign and Photoshop. Now I want to use a lot of svg's from "TheNounProject", due to their high quality and ...
2
votes
3answers
797 views

export multiple Inkscape SVG files to multiple PDF files

I have a number of svg files created in Inkscape. I would like to know if there is an utility where I can export all the svg files into multiple pdf/png files. I have around 150 such svg files. The ...
0
votes
0answers
130 views

SVG Filter: Fisheye [duplicate]

Is it possible to make an SVG filter that will apply a fisheye effect to an image? Or is this beyond the scope of this technology. I don't have a great understanding of vector graphics, etc. and if ...
1
vote
1answer
848 views

SVG Downward Inner Bevel

I am trying to reproduce this image as SVG: It was made in Photoshop simply by creating a rounded rectangle and setting an inner bevel layer style, downward. (It's a bit hard to see on this site, ...
4
votes
3answers
580 views

TTF and other “modern” font systems, and font size differences

I have no formal (and precious little informal) graphic design training. Fairly famous Computer Science person Dr. Donald Knuth long ago developed a font description system called Metafont. In and of ...
7
votes
3answers
3k views

Is vectorizing an image copyright theft if the image is not CC/Public domain?

Is it okay to vectorize this image to make a poster out of it even though the image is not Creative Commons or anything like that? I'm not using any part of the image directly and only going to use it ...
0
votes
4answers
309 views

Can Inkscape be associated to SVG as the primary tool of the trade? [closed]

I'm planning to make an icon to represent SVG. I know there are official logos, but I never saw them until I looked for them, and I don't believe many designers associate SVG to these logos. My icon ...