1

I want to set the length of the red line to be 0.5". (Actually, the svg doesn't export the red, so let's say the one that points to 4 o'clock.)

How do I do that?

enter image description here

3

Another, possibly quite precise option, using the measurement tool:

https://youtu.be/lcYv5dLTScU

| improve this answer | |
  • 1
    Upvoted for easier, previously unknown feature (to me) – fred_dot_u Jan 14 at 10:53
2

create orthogonal reference line of approximate desired length

(hold control while creating line) and adjust as needed in appropriate width field.

reference line

note: size in mm equals one-half inch

change color and increase width of stroke for ease of use

reduce opacity for same reason

place new line on separate layer for ease of destruction

reduced opacity on new layer

drag horizontal and vertical guides to intersect node of line at static end note: ensure that the guides are intersecting the node/snapping to them

guides intersecting at line end

drag new line to snap to line to be changed at static end

snapped new line to old line

click on new line to change to rotate mode

note pivot crosshairs

drag pivot crosshairs to intersection of guides

note: use maximum zoom to ensure the rotation center is on the node/guide intersection. I've not been able to locate a resource which permits the rotation center to snap to anything

rotation center close to node and guide intersections

Note that the rotation center is not at the guide intersections, as it disappears when placed there. For the purposes of this presentation, it's close enough to see and the answer states to place it on the dot, so to speak.

rotate new line at optimum zoom to align with existing line

rotated new line

There is no snapping going on here, but at a good zoom level, one can use TLAR to ensure that the lines are parallel. (That looks about right).

select existing line in node edit mode

snap existing line end to new line end

snapped old line

I've rotated the newly adjusted line to horizontal by eyeball and note that the dimension field shows the desired 12.7 mm length.

"un-rotated" line for length check

delete layer/new line as desired

There may be an easier/better way to accomplish this. My first thought was to create the line length necessary and place and rotate it, but that's not how the question is phrased.

One could eliminate the guides, but that reduces a bit the "precision" available to place the rotation crosshair, especially at maximum zoom.

| improve this answer | |

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.