I am working on a document and the client would like an exported PDF with the following settings “2/2 coloured black + plus 1 additional colour”. It is a CYMK document and currently exports as 4/4 colour euro scale. I am not 100% sure what the commercial printer will be looking for in the document settings but at the moment the ink management settings still show 4 colours in use. I have some RGB images in the document. Could this be an issue? Things I’ve tried:

  • I’ve changed the ‘appearance of black’ to print blacks accurately. However in Acrobat the blacks look grey. (I used the default black in InDesign (0,0,0,k 100))
  • There are only 2 swatches in use in the document (black and this 1 other colour).
  • When exporting to PDF I am selecting the output as ‘preserve numbers’
  • setting the additional colour as a spot colour.

Am I on the right lines? What am I missing? How can I check the document only has 2 colours in it once exported? Help much appreciated.


2 Answers 2


There's a whole lot wrong here... or a whole lot you are seemingly unaware of.

First.. A commercial printer will be looking for 2 colors if you have more than 2 colors for whatever reason.... you don't have a 2/2 document. The actual operation of exporting to a PDF will never create a 2 color file. There's no setting, no job options, nothing to set when exporting to PDF which will magically create a 2 color file. The document must be set up as 2 color before any export.

It is possible using Adobe Acrobat to check the ink usage within a PDF if you are unsure. Similar to below... which you can do within InDesign...

You can also use the Separations Preview panel within InDesign (Window > Output > Separation Preview). The panel will allow you to turn off visibility of colors to see what will print. You should be able to turn off your 2 colors and see nothing. If you can't do that, the file set up is incorrect.

Using the Separations Preview Panel and toggling color visibility, you can see in the animation below the triangle and lower circle are still built using process colors. Therefore this artwork is not configured correctly for, in this case, 3 color reproduction.

enter image description here

If the artwork is correctly configured, you should be able to toggle visibility of colors you are expecting to print and see nothing else. So, below, I can turn off visibility for black and the 2 pantone colors and nothing is visible. That's correct.

enter image description here

Yes you should work with a CMYK color document. However, unless you are using a spot color in InDesign, you will have a 4 color PDF upon export.

The color of a swatch means nothing to the PDF export. It is the color definition created when using a swatch that matters.

You can have a "red" swatch. That swatch can be C0M100Y100K20, or R100G0B0, or Pantone 187. Only using the Pantone swatch will result in a single color upon output because the color definition is one color. See here for an explanation of spot color vs process color reproduction. This is also a decent explanation.

You can change the color definition of a swatch to be a spot color, so it will separate as a single color. Merely double-click the swatch in the Swatch Panel and set the Color Type drop down to Spot. In the animation below, note how the icons on the right of the panel change to indicate a spot color. And, also as shown below, you can verify this with the Separations Preview panel again.

enter image description here

Most professionals would use a spot color from a built in color book such as Pantone colors. This is done to ensure better color matching. If you merely change a swatch to a spot color, there's a margin for error in the actual color since a print provider will be guessing as to what "red" actually means (or whatever you name your swatch). Using color books, such as Pantone's, ensures everyone is referencing the same color.

Is your "1 additional color" a spot color? If not, it should be.

And YES RGB images are a MAJOR problem. They need to be strictly 2 color images. RGB is Red/Green/Blue.... i.e. 3 colors... and can only be converted to 4 color upon export. Just because a raster image may look like it has two colors, it does not have only 2 colors, unless it's been correctly configured.

If you place an RGB image within the document, it will be separated to 4 colors. The Separations Preview Panel will also show you this...

enter image description here

Configuring raster images for two color printing can be a lengthy process depending upon the image. There are several question here regarding raster images and two color reproduction...

In short .. simply using 2 colors within a layout does not create a 2 color file. You have to be specific about color definitions... and not use anything other than 2 specific color definitions within the document layout.


It does not matter if you only have 2 swatches in the INDD file and then add "some RGB images in the document", this likely cannot result in having a 2-color PDF export.

Normally with a 2-color print requirement, you should attempt to build everything in InDesign using shapes and fonts exclusively laid out in InDesign, without pulling in external (raster) links, which may force this back to having a 4-color PDF.

If the RGB images are full color, like pictures, you are sending off a full 4-color PDF to print.

In that case you need to remove the images, and find a way only to design this by only using the 2 swatches in the INDD file for everything.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.