I wonder where drop caps should be used. So far, I only see them in column of newspaper. Are there any cases which drop caps shouldn't be used, like in scientific papers or brochures?

enter image description here

2 Answers 2


Fifteen Centuries of Versals

There are many ways to indicate the beginning (or resumption) of a section of text, including paragraph indents, blank lines, changing the weight or style of the opening part of the text, ornamentation like fleurons — and versals, a category that includes drop caps.

A Manuscript Example

Versals, also known as lettrines, originated in the scribal tradition of illuminated manuscripts. The Book of Kells and the Lindisfarne Gospels are overflowing with elegant and sometimes even lavish examples of these.

For example, from the prefatory material to the Gospel of Mark in the Lindisfarne Gospels on page 15, we find this excellent example from around 700 ᴀᴅ:

Lindisfarne Gospel, page 15: preface to Mark

Here the opening letter M for Marcus is a large versal, but the scribe does not just jump right into regular text, but finishes the rest of the word in a style intermediate between the versal proper and the normal text that follows it.

For the most glorious of versals, where no expense was spared, silver or even gold leaf was added (tip for calligraphers: when laying silver leaf, use a blue backing, and when laying gold leaf, a red one), and the versal could expand to fill the entire page.

Perhaps the finest example of this is the Book of Kells’s Chi Rho page, whose chi-rho monogram of the Greek letter chi, Χ, and the Greek letter rho, ρ, is not only a page-filling versal but a unique work of art:

Chi-rho page from the Book of Kells

By the way, that monogram is so famous that it has its own code point in Unicode, U+2627. That’s ☧ in the current font, or chi-rho in Symbola in George Douros’s highly recommended Symbola face.

A Letterpress Example

Following Gutenberg’s Bible, the second book to be printed using movable type was the Mainz Psalter in 1456. This typeset work artfully combines two-color printing of movable type and woodcut, with the woodcut versals printed in blue and red and the “normal” (read, movable-type) text printed in black and red:

Mainz psalter example

So versals survived the transition from manuscript to set type reasonably intact, although just how much trouble and cost the typographer and printer wants to puts himself through varies. For exceptional printings, a rubicrator was hired to add the finishing touches by hand. The Mainz Psalter was quite expensive to produce even its day, and two-color printing remains something of a rarity today, where it is found only in the fanciest and generally collectable volumes.

Costly though such printing is, combining illustration and type in the page and in two colors no less, it was still immeasurably cheaper in both time and material than the illuminated manuscripts that preceded it: it could be mass-produced.

A Modern Example

Versals continue to be used in print today, although more often in fancier texts than a refereed journal article. You see them often enough in magazines, although not always to the same level of quality. A lavish, leather-bound volume printed in two colors may well have them.

But on the web, calling it a challenge is too charitable by half, for the web has for the most part not even reached Gutenberg’s level of sophistication in typography. It can be done, but it is difficult and tricky, and varies depending on what technology you are using.

However, if you are setting a text that shall see actual print, or are using something like InDesign to set that text, then you certainly can use drop caps.

In The Elements of Typographic Style, Bringhurst spends a fair bit of time talking about how to do, and how not to do, versals in typeset text. Here is just a small excerpt of the larger text on the matter, with bold emphasis mine:

[. . .] Another excellent method of marking the start of the text, inherited form ancient scribal practice, is a large initial capital: a versal or lettrine. Versals can be treated in many ways. Indented or centered, they can stick up from the text. Flush left, they can be nested into the text (typographers call these drop caps, as opposed to elevated or stick-up caps). If there is room, they can hang in the left margin. They can be set in the same face as the text or in something outlandishly different. In scribal and typographic tradition alike, where the budget permits, versals too are generally red or another color in preference to black.

            Elevated caps are easier to set well from a keyboard, but drop caps have closer links with the scribal and letterpress tradition. And the tooling and fitting of drop caps is something typographers do for fun, to test their skill and visual intuition. It is common practice to set the first word or phrase after the versal in caps, small caps, or boldface, as a bridge between versal and normal text.

On the following page, Bringhurst then illustrates seven examples of how a versal can be set, with subtle differences between them.

Bringhurst example of versals

In each example, Bringhurst uses small caps for the phrase that the versal began, which serves as a stepping stone to the normal text. Every one of his seven versal examples does something slightly different from the others:

  1. Osculetur: The first versal is not a drop cap but an elevated one. The large O is indented. It is set in Castellar (at 54 points), a face specifically designed for versals. Because of the way it does not flow into the text that follows the way a drop cap does, in my opinion this sort of versal would work better at a chapter head than at a section head — which is exactly what Bringhurst has done here.

  2. Trahe: From here on out we are in the same face as the body, but set at 42 points. Notice how with this one, the versal hangs a bit in the left margin, with the text flush left against it. However, the stem of the T is within the normal text block, not hanging out. So it is not centered at the margin, but balanced.

  3. «Nigra: Now the versal is flush with the rest of the body, but the chevron used for quotation hangs in the left margin and is larger than the normal text but not quite so large as the versal itself; it is also centered against the versal. This looks rather nice, as is to be expected with hanging punctuation of this sort.

  4. “Adiuro: Here the punctuation and versal are both flush left again, but now the text block to the versal’s right is fitted line by line to the shape of the versal. This is important, because if the three lines were aligned with each other, the gaping hole in the middle of the word could cause confusion.

  5. Vox: This versal hangs in the left margin, but is exactly centered, and its adjacent text block is fitted to flow with the versal.

  6. Surge: This versal is set at the exact margin, without any hanging. The adjoining text block is not exactly fitted to the versal but its small cap portion starts at a different point than the two lines immediately below it.

  7. Lavi: Although this versal may at first glance look to be the same style as the one immediately preceding it, it is not. The stem of the L is flush left, which means that the serif at its top hangs just a tiny bit in the left margin. You can tell because its edge is to the left of the word terra just above it.

As you see, there’s a lot more subtlety to doing a good job with drop caps than might be immediately obvious. That’s why it is “something typographers do for fun,” as Bringhurst puts it.

How Not to Do Drop Caps

So where should you use these? They work best at the beginning of a chapter. They would not be used in text submitted to a refereed journal because that journal will always have its own style into which your submission must be fit.

But setting them well requires skill, and it is better not to use them at all than to set them poorly. In my opinion — and with all due respect, the example given in another answer here is an example of how not to set a versal:

Bad example of a drop cap

What’s wrong with that, you ask?

For one thing, it is using a drop cap for After but not fitting the text to the right to the versal’s shape. It does not look good to have all that space, and the reader might momentarily wonder what “a  fter” might be.

For another, that text block ends up crowding the versal too much, even though it started out by not crowding it enough. The phia at the start of the last indented line is nearly on top of the bottom right foot of the A. You have to let your drop caps breathe; notice how differently Bringhurst’s A is set compared to the one in the later example.

Finally, there is no transitioning from the drop cap to the normal text. It just abruptly switches to the full body text with no intermediary form or forms. That’s not very attractive — or sensible.

The example added to the original question has many of the same problems, and then some:

Another bad example of a drop cap

Problems in that example include a misaligned baseline for the versal, no fitting of the text to the letter, lack of transitioning from versal to normal text, and not enough breathing room for the versal. See the Bringhurst L for a better way to do all that.

The example also uses the nonsense Lorem ipsum text — which, being not Latin but fake-Latin “garblese”, can seriously annoy scholars, since it has “words altered, added, and removed such that it is nonsensical, improper Latin.”

Lastly, something has gone very wrong with the kerning for that font; look, for example, at the letterfit around the various instances of the letter c. It’s as though there were a thin space inserted after every c.


So drop caps can be done just fabulously when properly setting text, even if the brutish typography available on the web can make this seem next to impossible to do well.

But if you’re creating PDF not HTML, go for it, because drop caps certainly can be done wonderfully — and should be, or not done at all.

  • 2
    Glad you decided to come on by and leave an answer!
    – Ryan
    Commented Jun 27, 2014 at 3:22
  • What do you think of using drop-cap letters which are "decoratively framed", and having all but the first line to the right of the drop cap insert some extra space before them (as with the "Surge" example)? Also, for the "Adiuro" example, I would favor having the first line hug the "A" but the second line start above the third; for "Vox", having the second and third lines come in is good, but I would favor having more space before them than before the first. Would you concur with such judgments?
    – supercat
    Commented Feb 20, 2015 at 17:45
  • @supercat I rather like the examples as presented. They demonstrate a variety of different approaches, and the professional setter of type should have all these and more at the ready.
    – tchrist
    Commented Feb 21, 2015 at 0:09
  • @tchrist: I agree the examples are nice; my suggestions were intended to go in the "and more" category.
    – supercat
    Commented Feb 21, 2015 at 0:12

Its said that drop caps are used to define the beginning of large amounts of text as a visual marker. So typically any content that has to be typeset some will add a drop cap at the beginning of the chapter that takes away an eye soar of text anywhere between two or three lines such as:

enter image description here

Drop Caps are not typically readable but an elegant identification of where the text is starting so keep that in mind. I would not use a drop cap in any work that has small amount of text and I would base it on the design. If you are designing a nice elegant brochure and have around four lines of text in a column than create one but consider your width of the allowed area so if you have 3 pica it may not be a wise idea.

Even though your question isn't in regards to Drop Caps for the web I still want to reference a nice read I found a few years ago called "Drop Caps: Historical Use And Current Best Practices With CSS" by Smashing Magazine that does cover some information I just told you.

  • 2
    What's "an eye soar of text"? I can't really make "eyesore" fit that sentence, either, I'm afraid. Commented Jun 27, 2014 at 9:32
  • Letter "I" as a drop cap can look like a vertical bar
    – Ooker
    Commented Mar 27, 2017 at 13:49
  • Is it good to have drop caps when there are already headings? I suppose it's only useful when the text doesn't have any heading, but it still contained clusters of paragraphs that should be distinct from each other?
    – Ooker
    Commented Mar 15, 2021 at 13:33

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.