I designed a package for a client. I did the design under a dieline. This means that there are still red lines around the design. Should I send this file to my client or should I clear the dieline before sending the file?
If you are going to be the middle-man between your client and the printer I would consult with the printer on what they prefer. If you are going to be giving the designs to the client I would give them a
If I were you I would have asked this upfront and asked the client where they intended to get the package design printed so you could possibly consult with them on what protocol is for delivering files.
Some printers do not want them with the supplied design because they are adding their own or have a preflight standard in place before it goes to the printer.
If you’ve gone to the trouble of creating a separate layer and included the dieline (also cutter trace or cutter guide), then leaving it in really isn’t an issue (on the contrary).
There can sometimes be some confusion if it’s all in a single layer and made up from CMYK rather than being isolated via a separate spot – this does require the designer/repro to remove the trace by selecting and deleting what can often be a series of unjoined lines. Hence the possibility that elements can be left in inadvertently.
As package producers, we have a series of internal checks for this and various possible issues – and we rarely pass artwork back if we can help – it’s our job after all. But sometimes it’s easier to revert to the original artwork and request that the trace is removed before re-submitting just to be sure.
Even if we’ve supplied the trace, we still remove it and re-apply the approved manufacturing version to ensure nothing has happened to the artwork in terms of scaling, etc., and that we’re working to the correct version of the approved sample. And if it’s a structural design which has been submitted by a customer, we still totally re-draw the file to ensure it’s correctly specified for the die maker and works for our machines.
So ultimately it helps to have it removed, but we try to do our best however the artwork arrives.