1

I am new in Adobe Illustrator. This is my first assignment on it. I want to divide my shape

This is my shape

enter image description here

i want to divide this shape like following image enter image description here

how i can do it?

1
  • Nice. This is way easier to answer than the previous question. – Joonas Aug 28 '15 at 9:03
6

First of all, your shape isn't created correctly, to get that perfect shape you need to use the Polar Grid Tool, set the width and the height (they should be the same), the Concentric Dividers to 0 and the Radial dividers to 6.

After that you need to create a simple Circle the size of the desired inner circle, select both shapes, center them Horizontally and Vertically and use Pathfinder > Divider then select the lines inside the small circle and delete them, you will end up with this:

enter image description here

After that, select the circle, give the lines a Stroke Weight equivalent to the gap you want between the "life cycles" objects and go ahead and Expand the entire circle.

All you need to do now is create another circle the exact H and W as the one you've keen working on and place it under, center them Horizontally and Vertically and then hit Pathfinder > Minus Front and delete the remaining inner circle:

enter image description here

Answering your question in the comments

First you need to see what Height and Width the circle resulted from Polar Grid is, for this, select the circle and check the Transform panel on your right and it will show the position on the X and Y axes, and the W and H of the circle. Create another circle of that exact W and H and fill it with a color, say red (no outline).

Now, right click on it, hover over Arrange and click Send To Back. Select both circles and click both Horizontal and Vertical Align Center then in the Pathfinder Panel, click Minus Front.

Another Edit regarding your last question in the comments.

If you wanna place an image over the object and take it's shape in Illustrator, you will use Clipping Mask. Just put the image UNDERNEATH the shape you want to place it over, select both the desired shape and the image, go to Object > Clipping Mask > Make.

enter image description here

There are other ways of doing this but I find this the easiest. Good luck!

9
  • No you dont need to use polar grid. – joojaa Aug 27 '15 at 12:59
  • @joojaa Like I mentioned in the end, there are a lot of ways of doing this, you could even draw a circle and 3 lines, one that is vertical and the other two rotated to -/+60 degrees and you would still get the shape but I find this easier. – Alin Aug 27 '15 at 13:04
  • @Alin All you need to do now is create another circle the exact H and W as the one you've keen working on and place it under, center them Horizontally and Vertically and then hit Pathfinder > Minus Front and delete the remaining inner circle: can you please explain it for me... I am not able to do this. How i can do it? – sunny Aug 28 '15 at 6:48
  • @sunny , I've explained it in the update of my answer (down). If you need help with anything else, comment. – Alin Aug 28 '15 at 8:05
  • @Alin i want to add images inside – sunny Aug 28 '15 at 10:17

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.