Questions tagged [perspective]
Questions about the way objects appear based on spatial attributes: how objects relate to the observer.
145
questions
0
votes
1answer
73 views
How do I create a cast shadow when the light source is lower than the object?
Below is a sample of what I mean. The light source is behind the object and lower than the sign. How would I draw a cast shadow for the sign?
4
votes
1answer
139 views
How to get rid of weird perspective overlay in C4D
How can I get rid of this odd overlay? It's currently highlighted in blue ... I've tried clicking on all sorts of buttons but could not shake it off.
2
votes
1answer
60 views
What are the causes behind the distortion that happens when you place a cube outside the Cone of Vision?
I am studying linear perspective and I have a decent understanding of the fundamentals, I know how to set up a proper grid with a cone of vision, station point and vanishing points that are at a 90 ...
1
vote
1answer
55 views
How can you define the closest actual plane using Vanishing Point?
In this photo, there's only one corner visible. That's why it is becoming difficult for me to define the floor plane (the plane on which objects like glass are placed). I want to put a Sachet over ...
1
vote
1answer
44 views
Making sense of 1 point perspective
When you draw a cube in one point perspective you start by drawing a perfect square. But, if I understand perspective correctly, you can only see the front plane of the cube as a perfect square when ...
0
votes
2answers
68 views
What kind of perspective is this?
I want to make something similar to this, but I can't figure out what the perspective is called. It seems like it is an aerial perspective maybe, but it's not quite looking straight down. Can someone ...
0
votes
0answers
42 views
Finding proportions in perspective
Is it possible to find proportions of a plane in perspective? All drawing the tutorials I find on the subject presume that there's a square object in the scene that you can reference to but what if ...
0
votes
0answers
41 views
How to use mockups in Gimp
I am all new to Gimp, so this may be a very basic question. I want to use a mockup that I found online to put my images in a picture frame. Now, I can only do this by adding the image as a layer and ...
0
votes
1answer
57 views
How to set up a perspective grid to draw a scene with multiple horizon lines
Most perspective tutorials I've encountered cover the basics of one, two, and three point perspective. However, they fail to discuss more complicated scenes in which there may be multiple horizon ...
0
votes
1answer
32 views
Is this correct perspective?
In the image below, I have illustrated the interior of a bedroom with a slanted wall. On the slanted wall, I want to add a poster. Did I correctly use perspective here? Basically, I picked a point on ...
0
votes
1answer
110 views
Why can ellipses be used to find squares in perspective drawing?
In Scott Robertson's How to Draw book he proposes a method for finding proportional squares using ellipses:
(the "conditions" he mentions are described on the previous page and are simply that the ...
2
votes
2answers
195 views
Perspective text in a circle - Adobe Illustrator [closed]
I'd like to recreate the "text in a circle" effect shown in the image with Adobe Illustrator
Which tool should I use?
2
votes
3answers
117 views
How to warp an image for sloped rooftop graphic?
I have a friend/client who wishes to paint a single graphic mural on their garage/shed rooftop, but they want it to appear in "proper" perspective when viewed standing on neighbor's lawn.
First, ...
0
votes
3answers
116 views
Symmetrical perspective with Free Transform in Illustrator CS5? [duplicate]
In Adobe Illustrator CS5:
I want a "depth effect" to an object with the straight-from-the-front perspective. But with the Free Transform-tool it seems to only be possible to drag one corner each ...
0
votes
1answer
75 views
Generate a vanishing point grid in Photoshop
I currently try to add more effects into my photos.
In my next project, I would like to add light beams representing the perspective.
For the lack of the better example, these light blue beams ...
0
votes
3answers
385 views
Tron style 3D wireframe matrix surface effect with Illustrator?
Remember that scene from the 1980s Transformers movie when this happened:
I thought it was amazing.
Anyway, I'm trying to make that retro "this is what we think the future looks like in the 80s" ...
0
votes
2answers
282 views
Perspective 3D mapping for Top and Bottom view in Adobe Illustrator?
Creating a 3D Extrude & Bevel of a package in Adobe Illustrator, how can I reach the same angle and perspective for Top View and Bottom View of the same object?
I can set the same Y and Z values, ...
0
votes
1answer
136 views
Object in perspective
I am trying to recreate the perspective of the street in the image with an object. The desired effect would let the flag of the LGBT appear as the road … I tried with different distort effects but ...
0
votes
1answer
111 views
3D Perspective moving background
I'm trying to recreate a piece of animation from Adventure Time. In the episode "Three Buckets", Fern, disguised as Finn, walks home carrying flowers. The grass he's walking on is clearly several ...
2
votes
2answers
565 views
How can I convert an object from one-point to two-point perspective?
Assume I have a one-point perspective drawing of a room, and I've drawn a rectangular box off to the side, on the ground - the front plane is facing the viewer (all angles on this plane are 90°), and ...
1
vote
2answers
3k views
How can I change the perspective of a text in Affinity Designer?
I know how to draw a text in a circle or semicircle shape but how we can change the perspective? I need it for an project in isometric view.
Regards
11
votes
2answers
1k views
What is the name of this perspective and how is it constructed?
I stumbled on this image in The Promised Neverland:
This kind of perspective is relatively common in the series and I'd like to know it's name, and how it can be constructed.
1
vote
2answers
694 views
How to create perspective with curved lines?
I have a simple task:
I want to create a train track that's slightly curved and disappears in the distance. The best I've achieved so far is the following image which I created with Affinity Photo:
...
1
vote
2answers
118 views
What is this type of perspective called?
The two Vanishing Points (yellow and purple lines, I think?) in this image are not on the same Horizontal Plain. We have been calling this “Split Perspective,” but so far have not been able to find ...
0
votes
0answers
85 views
What is this style of mixing 3D elements with 2D elements and perspective called?
I'm curious if there’s a specific term for this style.
2
votes
1answer
284 views
Relation between picture plane and observer in perspective
I have some notions of geometry and I am currently trying get a full grasp of some features of perspective. I am having a hard time understanding the relation between the observer and picture plane ...
1
vote
1answer
776 views
How does the Golden Ratio/Spiral Work? Is it useful with Logo Design? [duplicate]
I will be looking to create a Logo very shortly. I am not formally educated in this principle, where I am self learning through a variety of online resources.
Through my learning, I have come across ...
3
votes
2answers
832 views
At what point does 1 point perspective become 2 point perspective?
I'm trying to imagine a box rotating, and want to be able to draw it without guidelines. Let's just say you're drawing boxes or cubes and you start with 1 point perspective, my problem is when that ...
1
vote
1answer
881 views
Krita - How to Snap Assistant Tools?
Using both the Assistant Tools and Grids and Guides in tandem with one another is useful for pixel art, comic book panels and perspective. There’s a problem with setting these up and I couldn’t find ...
2
votes
1answer
162 views
Why does moving the station point change the COV but not if you move the picture plane?
To my limited knowledge I understand that moving the station point further away from the picture plane results in having a bigger cone of vision. If I have a flashlight and move a couple of steps back ...
2
votes
2answers
898 views
Finding the possible vanishing points in a landscape
I was trying to practice finding vanishing points in different images, and most tuts I followed showed images with at least some rigid surfaces like a table or something, but, I found a particular ...
1
vote
1answer
310 views
Why does the vanishing points have to be 90 degrees apart in 2 point perspective?
When I have set up my Picture plane and cone of vision and station point I've read that you need to place the vanishing points 90 degrees apart and I never understood the reason behind it? Why 90 ...
1
vote
1answer
135 views
Aligning texture vectors in perspective for a mockup item
I have several photos of a certain household item (a football, for example) that I would like to customize its design for a presentation. Each photo is a picture of the same item showing different ...
2
votes
2answers
154 views
Software to create perspective line with curves
What software and tools can I use to quickly create lines over single or multiple photographs that have the effect of disappearing into the distance? Sometimes the line would need to have curves. I ...
1
vote
2answers
149 views
How to change the perspective on text that is angled?
I'm trying to take something like this:
And change the perspective so the base line can be flat like this:
5
votes
4answers
3k views
Apply 3D perspective in photoshop
I know that I can apply a perspective in Image > transformation but it doesn't give me enough freedom. For example, I've this image like that
How can I rotate this image around X axis or Y axis with ...
2
votes
1answer
194 views
How do I draw the inside of a torus?
I'm trying to make a drawing of the interior of a Stanford Torus, similar to this:
Is there a way to draw the perspective of the torus accurately without using a 3D model?
2
votes
1answer
332 views
How does the distance between stationary point and picture plane effect perspective?
I want to understand what happens when you increase or decrease the distance between the stationary point and the picture plane?
I tried drawing a border (approximately 9” x 12”) on a real window ...
3
votes
1answer
1k views
Why is it recommended to make the cone of vision 60 degrees?
Im currently trying to understand the cone of vision and I was wondering why the cone of vision is recommended to have 60 degrees? I mean where does the number come from? I always though the vision ...
3
votes
1answer
662 views
Whats the difference between perspective and foreshortening?
I am wondering what the differences between perspective (1 point/2 point/3 point) and the term foreshortening is when drawing?
3
votes
2answers
2k views
Draw 3D twist and bends in ribbons in Inkscape
I am back with a new challenge. I am hoping to draw a helical ribbon and arros with 3d bends and twists. I am in inkscape, and I do not beleive there is a ready made tool for this sort of thing. I am ...
11
votes
2answers
2k views
How would I draw a shadow from a spherical object onto a non-flat surface?
I am trying to figure out how to draw a shadow from a spherical object onto a non-flat surface. How would I draw the distortion of the shadow onto the surface?
3
votes
1answer
66 views
Does the front plane ever change in 1 point perspective? [closed]
In one point perspective drawing does the front plane that is facing us ever change shape or get smaller if you draw a box?
If I keep drawing boxes that is below the horizon line lower and lower in 1 ...
0
votes
1answer
261 views
How to only scale a certain part of a logo in Inkscape?
I have stumbled upon a problem regarding the creation of a logo for a Piaggio vehicle (the truck below). Because of the grooves I want to scale a certain part of the logo and make it look good when ...
3
votes
2answers
271 views
What do you call this type of top down grid, sort of trapezoidal?
I have checked and this may be called Top-Down (Oblique) from the wikipedia page of Axonometric projection BUT the image I am looking for kinda have that trapezoidal nature. As you can see the grids ...
0
votes
1answer
61 views
Logo import into antenna photo
I photographed antenna a lot of diffrent perspective like this and i have to add company logo into all antena bowl.
I wonder that can i creat a smart object like antena bowl to add logo into the ...
2
votes
0answers
172 views
Advice on drawing 3/4 view perspective of a vehicle
(Reposted here under the advice of @Philipp)
What is a good method to make a 3/4 view car, truck or other vehicle going around a corner?" As stated above I have a firm grasp on how to do N/S E/W just ...
4
votes
1answer
448 views
Is it possible to create slanted objects in Illustrator's perspective grid?
I've been looking for a while but haven't found anything useful. When working with the perspective grid, the first thing I wanted to do is to draw a laptop. I wanted its lid to be slanted at an angle. ...
0
votes
1answer
229 views
Wireframes of landmarks
I found these wireframe vector graphics of a few landmarks and was wondering how they were created. I doubt it was done by hand, so what kind of techniques are there to create this kind of graphic?
...
0
votes
2answers
851 views
What kind of perspective is used in this image??
I'm trying to figure out the perspective of this image!!
I'm sure it's not a 3-point perspective and I lean toward 1-point perspective. I tried to figure out the vanishing points of the image and ...
