Hot answers tagged

9

Simply add a Color Overlay layer style to a black and white photo. Set the overlay to Multiply and reduce the opacity until you are happy. In this case a blue-grey color is used for the overlay.


7

Create a rectangle filled with a color. Reduce the rectangle's layer opacity in the Layers Panel. Done.


7

Here's my take on it, it's a bit complicated but very effective, and can especially be used when you scan a drawing and want to take the pencil tracing from the white background in order to change the color. (Switch the Ctrl for Cmd if you are on Mac.) Make sure your image is flattened first on a white background Select all and copy (ctrl+a, ctrl+c) Go into ...


6

What I think you are trying to say is you want a lemon texture over an image. To do this, I would do this: Create a fully colored lemon (or just use an image) Go to Image > Adjustments > Desaturate Image Go to Edit > Define Pattern Create a Blank New Layer above the Image you want to place the texture Go to Edit > Fill (Make Sure under Blending, Mode is ...


6

1) Use a Black & White adjustment layer. 2) Use a Photo Filter adjustment layer. I used a custom purple #6c118e. I made the intensity 95% and the opacity 98% (really just messing with the sliders) 3) Added a levels adjustment layer to brighten the image. I just moved the white point slider to the left, towards the middle. 4) Added overall saturation ...


5

To obtain a similar result I desaturated the image to grayscale Applied the bucket paint tool in multiply blend mode using a purple color.


5

Those are safe regions of your camera: Blender has the same tinted border. If you don't want it when looking through the camera, you can go to Options > Configure > View > Tinted Border and disable it.


4

You could change all of the black to transparency as is answered here Or a possible alternative since you are programming (depending on what you are programming of course) could be to program the behavior that the screen blend mode enforces; From Wikipedia; With Screen blend mode the values of the pixels in the two layers are inverted, multiplied, and ...


4

The technique is called "marbling," and is achieved by pouring multiple paints into a wide shallow container and then using a stick or toothpick to gently stir them together. With decent lights and a camera, you will probably get faster and better results doing this with real-world materials. I think that the sample images were probably done "IRL" rather ...


3

It should be simple to do if you build your layers like this. top White text Orange layer set to multiply Levels layer (if needed) Black and white image bottom If levels are needed, just push the contrast and maybe make the black more grey if you want it to appear faded.


3

Late to the party as usual. You could also simply use a gradient map adjustment layer with black and violet (as sampled from the right side of your image) for your two colors.


3

I couldn't see the attached example but a little image-Googling made me guess it's the 2013 Denver County Fair poster. If it is, that effect can be done in Inkscape. Here's one way to do it: Make 2 different gradient filled "rays" per sunburst. The angle of the pennant shapes depends on how many rays of each you want in a sunburst (9 degrees in ...


3

You don't need to do anything other than ensure the bleeds are set in the Document Set Up and you include bleeds when exporting to PDF. Just place the image (or whatever) across the gutter of the facing pages. When you output facing pages to a standard single page press-ready PDF the bleed will be added to the gutter area. You simply don't see the bleed ...


3

When you make a gif, every frame is a single image with different settings in the layers palette. Therefore, you need to create the image in the layers palette and then create the frames and animate it. So basically you're working backwards. First create the image, add all the shadows and effects you need and then animate it. Also, if you want to add a ...


3

These images are not the size you say. The top one is 1280 x 720, and they aren't the same aspect ratio either. However if you can get them the same size, you can open the black image as a new layer above the photograph (using File > Open as Layers). Then set the layer blending mode to Screen in the Layers panel, making sure you select that Layer. Then you ...


3

I see you have found some plausible images of detoriated painted surfaces. Also the knackered black text is quite plausible except its paint is not at all washed out during the years. If that's wanted, washing the colors by painting over is already presented in another answer. Obviously you have still not tried to erode text RESTRICTED AREA, which is a hole ...


3

There's a screen capture app that has similar capabilities called ShareX - I believe it's for Windows only, and it's Open Source. Here's an example of what it can do below. All of the additions were made using the application. You can also use the software to create video and gif screen captures. I have no affiliation with the software or its developers.


2

I came upon your question while trying to solve a similar situation. I wanted to take the "shadows" from an image of a barn to use as an overlay on text to give the impression of the text being painted on the side of the barn. I'm not sure if my solution was the "best" way, but seemed to be fairly simple and give a lot of control to the effect I was going ...


2

For some reason this question has popped up after 5 years it was posted. Then obviously web designers hadn't blending modes such as hard light, multiply etc... They had only transparency for blending layers. That has not prevented attempts to get something altough partially transparent greyshade texture made the colors dull as we see in older answers and ...


2

Generally it's desired to apply the darkening and gradient on the same element. This is true when you want the whole image to be darkened (as it seems you want). To do so, you just have to use a linear-gradient: .container { background: /* Top color overlay, in this case darkening */ linear-gradient( rgba(28, 31, 29, 0.7), ...


2

It is because you have a margin on the class box .box { /* margin: 25px; */ padding: 20; border-radius: 10px; border: 3px solid #BC3E40; } See jsfiddle - https://jsfiddle.net/ry4ummkp/1/ If you want space between the red outline and the container you can add padding to the container instead of a margin on the box. This may affect your ...


2

Step 1: Let's add a little noise to the image to help the two photos blend more seamlessly together. Go up to the Filter menu at the top of the screen. choose Noise, and then choose Add Noise. This brings up the Add Noise dialog box. Set the Amount to somewhere between 2-6% depending on the pixel dimensions of your image. I'm working on a low resolution ...


2

Add a Black and White adjustment layer above the image. Add Gradient adjustment layer above the image. Change blending mode to multiply. Adjust opacity of gradient layer to fine-tune result.


2

Draw a shape, reduce the fill to like 10%, duplicate and rotate. Here I did it with 12% fill. No blend modes needed:


2

No. Color = alpha*FG + (1-alpha)*BG what you are proposing is Color = alpha + (1- alpha)*(0+(1-beta)*original) so alpha would have to be (0.3 original)/(-1. + 0.7 original) if first layer is 0.3. So no not possible unless you only have one color. Even if this wasnt the case you would lose all pure colors by clipping.


2

The problem here is that multiplying or overlaying colours onto a greyscale image kills the highlights. In reality, highlights tend towards white regardless of the colour of the object while overlaying a colour onto a greyscale image creates a solid, dark, coloured highlight leading to a flat, fake appearance. What you need to do is create a second version ...


2

You can use a knockout on the the box you want to "cut through"... Give the shape an opaque fill (i.e. anything non-transparent) Open that layer's Layer Style dialog... Set Fill Opacity to 0% Set a Knockout to either Shallow or Deep, depending on how far you want the transparency to go* *A "Shallow" knockout will cut through to the end of the group the ...


2

I think this can help you. Select and unwrap the front. Select the Front Merged Material Layer and Edit its texture. Now you will see the results in the cube while you paint the the texture. See images below.


2

My attempts playing with this. Start with a clean image. A. Get a nice texture https://www.texturepalace.com/gallery/metal/0405/8metal_texture_big_100405.jpg and saturate it a bit. B. Extract the green channel, because it has more contrast between the rust and the non-rusted areas. This file will be used in different moments. C. I inverted it and ...


Only top voted, non community-wiki answers of a minimum length are eligible